How to Root redmi Note 3 and Install TWRP 3.0.2
ROOT REDMI NOTE 3 and INSTALL TWRP TUTORIAL
Points to remember
- Ensure that you have installed necessary USB drivers for Xiaomi Redmi Note 3.
- Enable USB Debugging Mode on phone by following the below method.
- Create a backup of all data of the phone before following the root method.
- Check the battery percentage of the phone, it should be at least 80%.
- Rooting the device will void the manufacturer’s warranty.
- The CWM recovery, ADB files and the SuperSU files are compatible with Xiaomi Redmi Note 3. Applying these on any incorrect variant might brick the device. Therefore, check the model number of the phone by navigating to Settings>> About device>> Model number.
Download files:
- Xiaomi Redmi Note 3 Root file: Download
- Minimal Fastboot files
- ADB USB Drivers
- TWRP 3.0.2 for Redmi Note 3:
How to Root Xiaomi Redmi Note 3 (Kenzo)
Step 1: Download the above Root file & Install it in your windows PC.
Installing Software to Root Xiaomi Redmi Note 3 in PC
Step 2: In your Xiaomi Redmi Note 3, Goto Settings > About Phone > Tap on MIUI Version for 7 times. Go back to Settings > Additional Settings > Developer options > Enable USB Debugging.
Step 3: Connect phone and PC with USB cable.
Step 4: After installing, Click on the button as shown in the below image. It will successfully root your device.
How to Install TWRP recovery in Xiaomi Redmi Note 3
Step 1: Download the above image file ADB files. Extract the ADB zip file using any extracting tool like winrar or 7zip. Place the recovery img file in the ADB extracted folder.
Step 2: If you have enabled USB Debugging, Goto Step 4. In your Redmi note 3, Goto Settings>About Phone, Tap on MIUI version for seven times, until you see, “You are now a Developer!”
Step 3: Go Back to Settings>Additional Settings > Enable USB Debugging mode & connect your device to your PC. Launch the ADB drivers file & You’ll see Redmi Note 3 as device name, Click on Install, to Install the necessary ADB Drivers.
Step 4: Now launch command.bat file from the ADB folder, type below command in the window to check if everything is done. (Press Yes in the window that will appear in your device to authorize.)
adb devices
Step 5: Now type the below command to reboot your device into bootloader
adb reboot bootloader
Step 6: Now for the final step of installing the custom recovery, type the below command:
fastboot flash recovery twrp.img
Step 7: That’s all, you have successfully flash TWRP Recovery in your device.
Step 8: Switch off your device & Press Vol down+Power button simultaneously to boot into Recovery mode.
ENJOY
0 comments