Powered by Blogger.

Android Hub



                                         SONY XPERIA XZ PREMIUM SPECIFICATIONS
                                        


LAUNCH                       Announced 2017, February

Status                               Coming soon. Exp. release 2017, June 1st

Dimensions                       156 x 77 x 7.9 mm (6.14 x 3.03 x 0.31 in)

Weight                       195 g (6.88 oz)

Build                               Corning Gorilla Glass 5 back panel

SIM                                      Single SIM (Nano-SIM) - G8141
                                              Dual SIM (Nano-SIM, dual stand-by) - G8142
                                         - IP68 certified - dust/water proof over 1.5 meter and 30 minutes

Display                                IPS LCD capacitive touchscreen, 16M colors

Size                               5.46 inches (~68.4% screen-to-body ratio)

Resolution                       3840 x 2160 pixels (~807 ppi pixel density)

Multitouch                       Up to 10 fingers

Protection                      Corning Gorilla Glass 5
                              - HDR10 compliant
                            - Triluminos display
                            - X-Reality Engine
OS                               Android OS, v7.1 (Nougat)

Chipset                     Qualcomm MSM8998 Snapdragon 835

CPU                     Octa-core (4x2.45 GHz Kryo & 4x1.9 GHz Kryo)

GPU                     Adreno 540

Memory                             microSD, up to 256 GB

Internal                             64 GB, 4 GB RAM

Camera                             Primary 19 MP, f/2.0, 25mm, EIS (gyro), predictive phase detection and                                               laser autofocus, LED flash 1/2.3" sensor size, geo-tagging, touch focus,              face detection, HDR, panorama 

Video                      2160p@30fps, 720p@960fps, HDR

Secondary                     13 MP, f/2.0, 22mm, 1/3" sensor size, 1.12 µm pixel size, 1080p

Loudspeaker                     Yes, with stereo speakers

3.5mm jack                     Yes
                             - 24-bit/192kHz audio
                           - Active noise cancellation with dedicated mic

Comms                            WLAN Wi-Fi 802.11 a/b/g/n/ac, dual-band, Wi-Fi Direct, DLNA, hotspot
                           Bluetooth v5.0, A2DP, aptX, LE

NFC                   Yes

Radio                   No

USB                  v3.1, Type-C 1.0 reversible connector; USB Host

Sensors                          Fingerprint (side-mounted, region dependent), accelerometer, gyro,                   proximity, barometer, compass, color spectrum
Features                         - Fast battery charging (Quick Charge 3.0)
                                - Xvid/MP4/H.265 player
Battery                          Non-removable Li-Ion 3230 mAh battery
Share
Tweet
Pin
Share
No comments

  • Android OS version: 7.1.1_r28
  • For devices: Kenzo
  • Source code: https://github.com/nitrogen-project | https://github.com/nitrogen-os-devices
  • Google Apps: Dynamic gapps
  • Recovery: TWRP

The rich functionality is based on AOSP, development was begun in November, 2015.

Copy the ROM and Gapps in SD card.
  • Go to your recovery
  • Wipe Data
  • Install ROM and Gapps zip.
  • Reboot - 1st boot takes around 5-10 minutes.
Enjoy


Stable builds HERE
Testing versions HERE
Share
Tweet
Pin
Share
No comments
ROOT REDMI NOTE 3 and INSTALL TWRP TUTORIAL


Points to remember
  • Ensure that you have installed necessary USB drivers for Xiaomi Redmi Note 3.
  • Enable USB Debugging Mode on phone by following the below method.
  • Create a backup of all data of the phone before following the root method.
  • Check the battery percentage of the phone, it should be at least 80%.
  • Rooting the device will void the manufacturer’s warranty.
  • The CWM recovery, ADB files and the SuperSU files are compatible with Xiaomi Redmi Note 3. Applying these on any incorrect variant might brick the device. Therefore, check the model number of the phone by navigating to Settings>> About device>> Model number.
Download files:
  • Xiaomi Redmi Note 3 Root file: Download
  • Minimal Fastboot files
  • ADB USB Drivers
  • TWRP 3.0.2 for Redmi Note 3:
    1. Snapdragon Variant: Download.
    2. Mediatek Variant: Download

How to Root Xiaomi Redmi Note 3 (Kenzo)

Step 1: Download the above Root file & Install it in your windows PC.
Installing Software to Root Xiaomi Redmi Note 3 in PC

Step 2:  In your Xiaomi Redmi Note 3, Goto  Settings > About Phone > Tap on MIUI Version for 7 times. Go back to Settings > Additional Settings > Developer options > Enable USB Debugging.
Step 3: Connect phone and PC with USB cable.
Step 4: After installing, Click on the button as shown in the below image. It will successfully root your device.

How to Install TWRP recovery in Xiaomi Redmi Note 3

Step 1: Download the above image file ADB files. Extract the ADB zip file using any extracting tool like winrar or 7zip. Place the recovery img file in the ADB extracted folder.
Step 2: If you have enabled USB Debugging, Goto Step 4. In your Redmi note 3, Goto Settings>About Phone, Tap on MIUI version for seven times, until you see, “You are now a Developer!”
Step 3: Go Back to Settings>Additional Settings > Enable USB Debugging mode & connect your device to your PC. Launch the ADB drivers file & You’ll see Redmi Note 3 as device name, Click on Install, to Install the necessary ADB Drivers.
Step 4: Now launch command.bat file from the ADB folder, type below command in the window to check if everything is done. (Press Yes in the window that will appear in your device to authorize.)
adb devices
Xiaomi Redmi Note 3 "adb devices"
Xiaomi Redmi Note 3 “adb devices”
Step 5: Now type the below command to reboot your device into bootloader
adb reboot bootloader
Xiaomi Redmi Note 3 "adb reboot bootloader"
Xiaomi Redmi Note 3 “adb reboot bootloader”
Step 6: Now for the final step of installing the custom recovery, type the below command:
fastboot flash recovery twrp.img
Xiaomi Redmi Note 3 "fastboot flash recovery twrp.img"
Xiaomi Redmi Note 3 “fastboot flash recovery twrp.img”
Step 7: That’s all, you have successfully flash TWRP Recovery in your device.
Step 8: Switch off your device & Press Vol down+Power button simultaneously to boot into Recovery mode.
TWRP-Recovery-for-Redmi-Note-3--1


ENJOY  
Share
Tweet
Pin
Share
No comments
The iPhone launch is usually the biggest technology event of the year, but the launch of the iPhone 8 will be even more important, as 2017 marks the tenth anniversary of the original iPhone. With such a momentous occasion at hand, all eyes are on Apple, and all the new features it is expected to bring to the iPhone product line.
There are already all kinds of iPhone 8 rumors swirling around right now - for example, it's been reported that Apple working on more than 10 prototypes of the next iPhone. Though over nine months remain before the iPhone 8 launch, the excitement about the smartphone is palpable, and leaks have already started pouring in, giving us a fair idea of what to expect from the device. Here’s a look at everything we know about the iPhone 8, Apple’s next flagship smartphone.

iPhone 8 may have an all-glass body

The all-glass body that we last saw Apple use with iPhone 4S is expected to make a comeback, with many iPhone 8 leaks suggesting that the next Apple smartphone will use curved glass on the back. This falls in line with KGI Securities analyst Ming-Chi Kuo’s prediction that Apple will not use aluminium or plastic in iPhone 8. The glass body will reportedly be held together by a stainless steel frame on the sides.

iPhone 8 may come in three (or more) screen sizes

While fans have become used to a choice of two flagship iPhone variants (4.7- and 5.5-inch displays) over the past three generations of iPhones, the iPhone 8 rumors say it may come in three screen sizes, or even more. According to analysts citing supply chain sources, Apple may launch iPhone 8 variants with 5-inch, and 5.8-inch, screens.
Barclays analysts say that the company will release the iPhone 8 with 5-inch and 5.8-inch displays, while maintaining the same overall size as the iPhone 7 and iPhone 7 Plus. This effectively means a bigger, bezel-less screen in the same dimensions as that of the predecessors. A Japanese blog recently reported that Apple will make the decision on whether to include a 5-inch iPhone 8 model in its portfolio by March 2017.
On the other hand, Ming-Chi Kuo – who has a great track record of Apple predictions – says that the company will release a 4.7-inch iPhone 8 with LCD panel and a 5.8-inch iPhone 8 with AMOLED display, which consumes less power and delivers better contrast. However, if the AMOLED supplies are insufficient, Apple may launch the iPhone 7s and iPhone 7s Plus with 4.7-inch and 5.5-inch LCD panels respectively, and a premium iPhone 8 model with 5.8-inch AMOLED screen.
A report by Japan’s Nikkei newspaper also talks about a premium iPhone 8 with a 5.5-inch or larger display. This report also says that the premium iPhone 8’s display will be curved on the sides, as we have seen earlier on Samsung Galaxy S6 Edge and Galaxy S7 Edge; the other two variants will have flat display panels, it adds. A new report by DigiTimes says that Samsung Display will be manufacturing the 5.8-inch AMOLED screen for iPhone 8.
Apple has reportedly partnered with arch rival Samsung in a $4.3 billion-deal (roughly Rs. 28,800 crores) to supply the OLED displays for iPhone 8. Samsung is said to be readying as many as 160 million OLED units for the iPhone 8, which is 80 percent of the 200 million iPhones sold in 2016. If the figures continue to hold true, then OLED panels may make their way to iPhone 7s, iPhone 7s Plus and iPhone 8, and not just the premium model. At least some of the remaining iPhone 8 OLED units may be supplied by China's BOE Technology Group, which is spending CNY 100 billion (roughly $14.5 billion or Rs. 97,000 crores) in setting up two AMOLED plants.

iPhone 8 will not have a Home button

This is the most frequently leaked of all rumoured iPhone 8 features: that the iPhone 8 will not have the Home button. Instead, the Touch ID fingerprint sensor and the selfie camera of the iPhone 8 will be integrated in the touchscreen itself. iPhone 8 may even have some new 3D Touch functionalities that enable it to replace some of the functions of the Home button. The iPhone 8 wraparound OLED screen will reportedly be incompatible with the current 3D Touch. In order to fix this, Apple will move to a 'film sensor' which will offer 'higher sensitivity and a wider range of 3D Touch pressure levels'.
(Also see: Imagining the iPhone 8 With No Home Button)

iPhone 8 may debut a new haptic feedback system

Apple will reportedly use a small, high-performance motor in the iPhone 8 to deliver better haptic feedback. So iPhone 8 buyers may get different vibration feedback for each function, such as switching between apps, going back to the homescreen, and unlocking the device.

iPhone 8 will probably have wireless charging

Another common iPhone 8 leaked is wireless charging. While wireless charging has been used by many smartphones, Apple’s take on the feature will be different. Apparently, iPhone 8 will feature long-range wireless charging that will not require the user to place the device on a charging station or even very close to it. South Korea’s Economic Daily News says Apple will use a wireless charging back cover for iPhone 8, so the feature may not be built-in.
(Also see: Meet the Wireless Charging Pioneers)

iPhone 8 may have an iris scanner

The ill-fated Samsung Galaxy Note 7 had an iris scanner, and the feature may make its way to the next Apple flagship smartphone as well, according to iPhone 8 leaks. Ming-Chi Kuo says Apple is working on introducing advance biometric features in the smartphone, so an iris scanner on the iPhone 8 may indeed become a reality. However, some reports say that the iris scanner feature will be ready for 2018, and not next year.

iPhone 8 camera may offer 3D photography

The Korea Economic Daily says that Apple is studying ways to use LG Innotek’s 3D camera module in the iPhone 8. LG Innotek’s 3D camera module will be used in the iPhone 8’s dual rear camera system, alongside the 3D technology Apple acquired with the buyout of LinX in 2015, to deliver photos with 3D effects.
Apart from this, iPhone 8 may feature Optical Image Stabilization (OIS) in the telephoto lens as well as the wide-angle lens. The iPhone 7 only has OIS in the wide-angle lens. The dual rear cameras of iPhone 8, at least in the rumoured 5-inch model, will be aligned vertically rather than horizontally, says a report.
iPhone 8 may be dust-, water-resistant
The iPhone 8 will reportedly sport an IP68 rating, which means that the device can be immersed for up to 30 minutes in up to 1.5 metres of water. The iPhone 7 and iPhone 7 Plus have an IP67 rating and can survive in up to 1 metre of water for up to 30 minutes. The IP68 rating is a significant improvement over the current rating, but it still doesn't mean that you will be able to take the smartphone swimming.

It's likely to be named iPhone 8

While past naming conventions dictate that the 2017 iPhone models would be called iPhone 7s, and iPhone 7s Plus, most rumors say may not be the case. The tenth anniversary of the iPhone launch in 2007, will make next year's release a pretty big occasion for Apple. You can expect the name of the smartphone to be iPhone 8, though it is not beyond Apple to just call it something like the ‘New iPhone’. However, a recent report by Fast Company suggests that the next iPhone may be named iPhone X.

iPhone 8 will probably be launched in September 2017

Apple has launched the next iteration of the iPhone in September for several years now, so it's probably safe to say you can expect to see the official unveiling of iPhone 8 in September 2017. The first phase of iPhone 8 should begin 10 days or two weeks later, most likely on a Friday.
iPhone 8 price
The iPhone 8's price will reportedly be close to $1,000 due to the expensive OLED panels, which are twice as expensive as LCD screens currently used in iPhones. The top-end iPhone 7s Plus 128GB model costs $969 (Rs. 92,000 in India), so a price tag north of $1,000 is not unimaginable. This price tag has also been tipped by Ming Chi Kuo.
Share
Tweet
Pin
Share
No comments
Samsung Galaxy A7 SM-A700FD is a superb mobile with high quality design. Android Samsung Galaxy A7 has 5.5 inch display of AMOLED display with 16M colors protected by a Corning Gorilla Glass 4. It runs on Android 4.4.4 Kitkat version with inbuilt themes of basic, craft, and classic, sweet, natural and etc.  Because of its unique dimensional design, Galaxy A7  appears smart and its performances as well.
Although Samsung A7 SM-A700FD is much faster in Gaming mode, root Samsung Galaxy A7 SM-A700FD provides additional features along with faster and faster performances furtherer. You can easily root Samsung Galaxy A7 SM-A700FD and install custom Apps, ROM files and settings. In addition to that Samsung Galaxy A7 SM-A700FD rooting allows enhanced battery life and high customization of the mobile.
Root-Samsung-Galaxy-A7-sm-a700FD

User Attention on Samsung Galaxy A7 SM-A700FD Root

  • You clearly need to keep a data backup of the device before rooting.
  • Battery power must be at or above 80%
  • Download Samsung Galaxy A7 Odin tool
  • Download Samsung Galaxy A7 USB Drivers
  • Download CF Auto Root

Disclaimer on ROOT SAMSUNG GALAXY A7 SM-A700FD

The guide on Samsung Galaxy A7 SM-A700FD root is strictly limited to the particular model number. So be careful with your model number. We are not responsible for any of the brick or damage the mobile.

How to Root Samsung Galaxy A7 SM-A700FD

  • Install USB drivers on PC.
  • Go to “System Settings” > Tap “Developer options” > Tap “USB Debugging”.
  • Switch the mobile off and press and hold Home Key, Volume Down key and power button for 10 seconds.
  • You will see a warning message on the phone and then press “Volume Up” key and enable “Download Mode”.
  • Extract the Odin.exe file and install the file.
  • Connect your mobile device to PC to start Samsung Galaxy A7  root .
  • Odin will detect the Samsung Galaxy A7 SM-A700FD automatically.
  • You will prompt to a message and click “PDA” button and select CF Auto Root file browsing the location.
  • Click “Start” button on Odin Samsung Galaxy A7 SM-A700FD root tool.
  • Root Samsung Galaxy A7 begins now and it will take a few minute to complete the rooting.
  • If your Android Galaxy A7 SM-A700FD root is successful then you will see a green circle on the screen.
  • During the rooting your android mobile will reboot several times and at the end of the process SuperSU app can be seen
Share
Tweet
Pin
Share
No comments
Android Nougat Official ODEX/DEODEX/ROOT/BUSYBOX - STABLE VERSION!



About Rom
* Model:SM-G935F
* Model name: Galaxy S7 edge
* Version Android: 7.0
* Changelist: 10422490
* Build date: Thu, 02 Feb 2017 06:57:30 +0000
* Security Patch Level: 2017-02-01
* PDA: G935FXXU1DQB7
* CSC: G935FOJV1DQB7
* Super-Stock Kernel for S7 Flat / S7 Edge includded!
* Latest bootloader/modem S7 Flat / S7 Edge included to aroma installer!
* Removed 100% Knox and Fota Client
* Rooted by SuperSU or Magisk!
* Busyboxed v1.26.2


Features

* fixed permissions for external storage r/w
* private mode fixed
* keep current csc or select region from aroma!
DBT,ITV,XEO,XEF,BTU,NEE,XEU,OPV,SER,SKZ,CAC,CAU,SE K,ACR,AFG,AFR,DKR,ECT,EGY,KSA,LYS,MAT,MID,MRT,MRU, MTZ,MWD,PAK,SMG,THR,TMC,TUN
TUR,XFM,XFU,XSG,ATL,AVF,CYV,MOB,MTL,OMN,PRO,SIM,SW C,TCL,VD2,VDC,VDH,VDI,VGR,VIP,VOD,XME,XXV,XTC,MYM, XSP,INU,INS,BNG,SLK,NPL

* added reboot to recovery button to power menu
* enabled fingerprint unclock after reboot without pattern or pin
* enabled duration keys lighting in the setting
* enabled secret mode in samsung browser
* disabled high volume warning for head phones
* enabled ambient display
* enabled floating messages
* enabled applock
* enabled screen capture toogle with screen recorder support
* enabled google assistant (only for english language)
* enabled air command N5
* enabled multi subsymbols for S7 keyboard
* enabled knox secure folder support
* 1060 Fonts Pack mod
* iOS Emoji mod
* A.R.I.S.E Sound Systems™ mod
* Dolby Atmos™ mod
* Dual Speaker Sound Mod

* bulid.prop tweaks for best results:
disable secure storage
faster boot animation
screen mirroring fix
battery improvment
lags and glitches reduced
and more...


* csc features like: 
call recording
identify unsaved numbers
receive MMS without mobile data on
support recent app protection
enable LTE mobile data icon instead 4G
enable data usage information under brightness slider
enable multi user support
enable flipboard briefing visilibity on page tw launcher
Vo-LTE support enabled
real-network speed meter in network settings
and more... 


* optimization tweaks for best results:
fstrim command on every boot
logs cleaner on every boot
zippaling on every boot
sqlite3 v3.12.1 optimization on every boot


Rom Control

Quote:
SystemUI Mods
* Right Clock (Show/Hide)
* Center Clock (Show/Hide)
* Tap Clock Launcher (On/Off)
* 3Minit Clock (Show/Hide)
* Stock Battery (Show/Hide)
* 3Minit Battery (Show/Hide)
* Display Battery Percentage (Show/Hide)
* Wifi/Data Signal Position (Left/Right)
* Left Traffic (Show/Hide)
* Right Traffic (Show/Hide)
* Network Traffic Preference
* Custom Text (On/Off)
* Virtual Buttons (On/Off)

Notification Panel Mods
* Data Usage Preference
* Device Info Preference
* Carrier Label Preference
* Custom Background for Notification Panel
* Single Swipe for right side (On/Off)
* Multi-User Icon (Show/Hide)

Phone Mods
* Custom Background for IncallUI

Other Mods
* Ambient Display (On/Off) with duration settings
* Fingerprint Screen Wakeup (On/Off)
* Lockscreen Rotation (On/Off)
* Lockscreen Clock and Date (On/Off)
* Lockscreen Clock second (On/Off)
* Lockscreen Help Text (Show/Hide)
* Next Alarm On Lockscreen (On/Off)
* USB plug in/out wakeup (On/Off)
* Heads Up Notification (On/Off)
* RAM Bar in recent panel (Show/Hide)
* Custom Background for Power Menu
* Extended Power Menu
power off (Show/Hide)
mobile data (Show/Hide)
airplane mode (Show/Hide)
restart menu (Show/Hide)
multiuser menu (Show/Hide)
reboot recovery (Show/Hide)
quick reboot (Show/Hide)
emergency mode (Show/Hide)
torchlight (Show/Hide)
screenshot (Show/Hide)
screen recorder (Show/Hide)
google assist menu (Show/Hide)

Apps Control
* 3Minit Battery Settings
* 3Minit Clock Settings
* Root Explorer
* AdAway
* Faster GPS
* SuperSU
* Dolby Atmos
* ViperFX
Download ROM

Click Here to download ROM ROM.G93xF.XXU1DQB7-v10.1.by.ambasadii.zip
Click Here to download ADDONS


How to install
Recommended installation when we come from 6.0.1 MM or stock nougat rom:

1 - download TWRP (herolte) for S7 Flat or TWRP (hero2lte) for S7 Edge
2 - download Odin v3.12.3
3 - download no-verity-opt-encrypt-2.2.zip file and then copy to the memory card EX-SDCARD
4 - activate developer mode on the current system and turn on the option 'enable OEM' - VERY IMPORTANT!
5 - reboot phone mode to 'download mode' and flash using Odin (position AP) TWRP recovery [ATTENTION you must turn off autoreboot options in odin and after flash manually reboot the phone into recovery mode]
6 - go to options and select wipe data format - write "yes" then after finishing wipe necessarily restart phone to recovery mode [ATTENTION this operation will clear the memory of the phone without touching the data contained on the ex-scdard]
7 - confirm "allow modifications" if recevory ask
8 - flash in the recovery file no-verity-opt-encrypt-2.2.zip
9 - reboot phone to recovery mode
10 - confirm "allow modifications"
11 - go to wipe option and do all wipes: data, cache, system , dalvik-chace
12 - install rom from zip
13 - restart phone and wait for system booting
14 - there is no need to upload the bootloader for Nougat 7.0! we remain on the current version 6.0.1!

Thanks
Share
Tweet
Pin
Share
No comments
The Samsung Galaxy S7 and S7 edge versions powered by Snapdragon 820 (all US carrier models) come with one unpleasant surprise in the form of a locked bootloader. This means that the modding community is going to have a pretty hard time to root and create recovery for these phones, paving the way for all the wonderful things that good custom ROMs bring. 

Their owners would have to wait for Android N to hit their handsets officially, for instance, which, knowing Samsung, may not happen before this time next year. Any battery life optimizations, bloatware stripping, or TouchWiz enhancements that need root will also be sorely missing for quite a while on US models, too, as those are often the benefits of customROMs for those brave enough to go there.

THE US CARRIER VERSIONS SHIP WITH LOCKED BOOTLOADERS, BUT THE EXYNOS ONES GOT ROOT

Fret not, however, as T-Mobile's flamboyant CEO John Legere would try and come to the rescue, and has apparently ordered his engineers to probe Samsung on workaround solutions that will satisfy all parties involved. He is not doing this only from the good of his own heart, though, as some users have reportedly started returning their phones with locked bootloaders, seeing that there will be no modding development for a while.

14 Mar
Mark Hibbard @MarkHibbard1
@JohnLegere @TMobileHelp Can you comment on the bootloader lock on the T-Mobile Galaxy S7? Many power uses are upset.

 Follow
John Legere 
✔@JohnLegere
@MarkHibbard1 I'm aware some are upset. It's under Samsung’s control, but my engineers are asking them for a solution that they can support.
2:06 AM - 14 Mar 2016
  •  
  •  5050 Retweets
  •  
  •  104104 likes

For comparison, the international Galaxy S7 and S7 edge versions, powered by Samsung's own Exynos chip, have no such restrictions, and already got root and TWRP recovery installed. 

Here's what you need to do if you have one of those and want it rooted - as usual, make sure that you have the correct model (an Exynos one), be advised that rooting will trip KNOX, back up everything beforehand, and charge your phone before you proceed:

1.
How to root the Samsung Galaxy S7 and S7 edge (Exynos)
Tap on the phone's build number in Settings > About five times to enable Developer options;
2. Go to the Developer settings and enable "OEM Unlock";
3. Get Samsung's Odin and Chainfire's auto-root file for your respective device on your computer:

  • Download Chainfire's auto-root file for the Galaxy S7
  • Download Chainfire's auto-root file for the Galaxy S7 edge

4. Unzip the files and get the “.tar.md5” extension;

5. Hold Home, Power and Volume Down buttons for a few seconds on your Galaxy S7 or S7 edge to go into the download mode;

6. Download and install Samsung's Mobile Phone Drivers so that Odin can find your phone;

7. Run Odin on your computer, and connect the phone to it with the USB cable , while it's in download mode, until Odin shows “Added message”;

8. Click the AP button in Odin, and select the .tar.md5 file you unzipped in step 4;


9. Click START and enjoy the ride. Your Galaxy S7 or S7 edge won't show progress, just the S7 logo while the process is ongoing. It will reboot a couple of times, and then will boot into Android.
Share
Tweet
Pin
Share
No comments
Older Posts

Featured post

Unlock bootloader of almost any motorola phone.

How to unlock bootloader of almost any Motorola phone. (1).  First you need to go in developer's options which is hidden in your pho...

About Me

Unknown
View my complete profile

Blog Archive

  • ▼  2017 (11)
    • ▼  April (1)
      • SONY XPERIA XZ PREMIUM SPECS
    • ►  March (6)
    • ►  February (4)

Popular Posts

  • Root Galaxy A7 SM-A700 FD
    Samsung Galaxy A7 SM-A700FD is a superb mobile with high quality design. Android Samsung Galaxy A7 has 5.5 inch display of AMOLED display ...
  • How to Root Galaxy S7 and Galaxy S7 Edge
    The Samsung Galaxy S7 and S7 edge versions powered by Snapdragon 820 (all US carrier models) come with one unpleasant surprise in the form...
  • Nokia 3 and Nokia 5 Specs, Price, India Launch and More
    Nokia 3, Nokia 5 Android Phones Launched at MWC 2017: Price, India Launch, Specifications, and More Nokia 3 and Nokia 5 Andro...
  • Samsung Galaxy S7 and S7 edge Rom (Nougat) Stable
    Android  Nougat Official ODEX/DEODEX/ROOT/BUSYBOX - STABLE VERSION! About Rom * Model:SM-G935F * Model name: Galaxy S7 edge * Version ...
  • Redmi Note 3 ROM stable (7.1.1) Nougat OTA
    Android OS version:  7.1.1_r28 For devices:  Kenzo Source code : https://github.com/nitrogen-project | https://github.com/nitrogen-os-d...
  • How to Root redmi Note 3 and Install TWRP 3.0.2
    ROOT REDMI NOTE 3 and INSTALL TWRP TUTORIAL Points to remember Ensure that you have installed necessary USB drivers for Xiaomi R...
  • Unlock bootloader of almost any motorola phone.
    How to unlock bootloader of almost any Motorola phone. (1).  First you need to go in developer's options which is hidden in your pho...
  • SONY XPERIA XZ PREMIUM SPECS
                                             SONY XPERIA XZ PREMIUM SPECIFICATIONS                                          LAUN...
  • Motorola Moto Maxx/Droid Turbo custom ROMS and stock ROM
    Hey guys, Check out some cool and fresh Roms for your Motorola Moto maxx or Moto Droid turbo. All the links are down below. (1.) L...
  • Samsung Galaxy S8 and S8 plus leaks
    Design: Next to no bezels and a button for Bixby The Galaxy S8 and its larger partner, the Galaxy S8 Plus, are all set to be beautiful a...

Created with by ThemeXpose | Distributed By Gooyaabi Templates